Model	STRONG-SR-7025
Measuring Range	700℃～2500℃
Detector	Si/Si
One-color mode Wavelength	1.08μm
Two-color mode Wavelength	Wavelength1：（0.7～1.08）μm Wavelength 2：1.08μm
Applications	High-temperature furnace,graphite furnace,vacuum furnace,semiconductor furnace
Distance coefficients	200：1
Focal length	Standard：0.35m adjustable to infinity， Near focus distance：0.2m～0.5m
Accuracy	±0.5%T℃（T is measured temperature）
Resolution	0.1℃
Repeat Accuracy	±2℃
One-color mode: Calibration coefficient	0.100～1.000, Adjustable in 0.001 increments
Two-color mode: Calibration coefficient	0.850～1.150, Adjustable in 0.001 increments
Response time	Fasted: 5ms，adjustable in 5ms-99.99s
Display mode	Industrial-grade self-luminous OLED display screen
Aiming method	Visual green spot (default) or eyepiece aiming, alternative
IP Rating	IP65

Model	STRONG-SR-6016	STRONG-SR-6018	STRONG-SR-7025		STRONG-SR-7030
Measuring Range	600℃～1600℃	600℃～1800℃	700℃～2500℃		700℃～3000℃
	1112℉～2912℉	1112℉～3272℉	1292℉～4532℉		1292℉～5432℉
Detector	Si/Si（Laminated Silicon）
1-color Wavelength	1.08μm
2-color Wavelength	Wavelength1：（0.7～1.08）μm；Wavelength2：1.08μm
Main Applications	Hot rolled steel, wire rod, metal forging, casting, induction heating, melting glass, cement kiln, semiconductor, vacuum furnace, polysilicon, monocrystal silicon			High-temperature furnace, graphite furnace, vacuum furnace, semiconductor furnace
Distance Coefficient	60：1	Standard 100：1，60：1 customized		200：1
Measuring Distance	Standard focal length：adjustable from 0.35m to infinite；near focal length：0.2m～0.5m
Measuring Accuracy	±0.5%T（T is measured value）
Resolution	0.1℃
Repeat Accuracy	±2℃
1-color Coefficient	0.100～1.100，adjustable in 0.001 increment
2-color Coefficient	0.850～1.150，adjustable in 0.001 increment
Response Time	Fastest 5ms，5ms-99.99s adjustable
Signal processing	Peak value, valley value, average temperature value; Ambient temperature too high/low alarm; switch between one-color and two-color mode; power down protection.
Output	0.100～1.100，adjustable in 0.001 increment
	Group1: Multiple analog outputs 16bit（4mA～20mA, 0mA～20mA, 0V～5V, 0V～10V optional), output resolution 16bit, accurate to 0.1℃, maximum current loop output load 600Ω，maximum current output load 10mA
	Group2: Analog outputs 4mA～20mA, resolution 16bit, accurate to 0.1℃, maximum current loop output load 600Ω
	Alarms output: upper or lower temperature limit alarm；PhotoMOS relay (infinite service life) on resistance≤2Ω, maximum allowed voltage: AC42V or DC60V; maximum allowed current: 120mA; response time: 2ms
	PNP level output（current output 100mA，with overload protection.）
Display Mode	Industrial-grade self-luminous OLED display screen
Power Input	DC（20～30）V，with over voltage, over current and short circuit protection; Power consumption： 5W（24V@200mA）with built-in EMI wave filter, resistance to pulse group’s Interference: 2500VDC
Warm up time	With built-in 40℃ constant temperature heater, start temperature measurement within 10mins after power on. Assembled whole-process temperature compensation, temperature measurement accuracy is nearly unaffected by ambient temperature.
Aiming Method	Green visible aiming laser or eyepiece, choose 1
Port	Imported sealed plug and 12-core high-temperature shielded cable
Operating Environment	No water cooling：-30℃～+65℃，air purge pressure: 0.1MPa，flow rate: 6L/ min With water cooling：-30℃～+120℃，water cooling pressure: 0.2MPa，flow rate: 2L/min
Protection Level	IP65

금속 용융 컨트롤을위한 고정밀 정상 고온계

금속 용융 컨트롤을위한 고정밀 정상 고온계

특징

기술 매개 변수