비접촉식 고정 적외선 고온계 600-1800C

Model

STRONG-SR-6016

STRONG-SR-6018

STRONG-SR-7025

STRONG-SR-7030

Measuring Range

600℃～1600℃

600℃～1800℃

700℃～2500℃

700℃～3000℃

Detector

Si/Si（Laminated Silicon）

1-color Wavelength

1.08μm

2-color Wavelength

Wavelength1：（0.7～1.08）μm；Wavelength2：1.08μm

Main Applications

Hot rolled steel, wire rod, metal forging, casting, induction heating, melting glass, cement kiln, semiconductor, vacuum furnace, polysilicon, monocrystal silicon

High-temperature furnace, graphite furnace, vacuum furnace, semiconductor furnace

Distance Coefficient

60：1

Standard 100：1，60：1 customized 

200：1

Measuring Distance

Standard focal length：adjustable from 0.35m to infinite；near focal length：0.2m～0.5m

Measuring Accuracy

±0.5%T（T is measured value）

Resolution

0.1℃

Repeat Accuracy

±2℃

1-color Coefficient

0.100～1.100，adjustable in 0.001 increment

2-color Coefficient

0.850～1.150，adjustable in 0.001 increment

Response Time

Fastest 5ms，5ms-99.99s adjustable

Signal processing

Peak value, valley value, average temperature value; Ambient temperature too high/low alarm; switch between one-color and two-color mode; power down protection.

Output

Group1: Multiple analog outputs 16bit（4mA～20mA, 0mA～20mA, 0V～5V, 0V～10V optional), output resolution 16bit, accurate to 0.1℃, maximum current loop output load 600Ω，maximum current output load 10mA

Group2: Analog outputs 4mA～20mA, resolution 16bit, accurate to 0.1℃, maximum current loop output load 600Ω

Alarms output: upper or lower temperature limit alarm；PhotoMOS relay (infinite service life) on resistance≤2Ω, maximum allowed voltage: AC42V or DC60V; maximum allowed current: 120mA; response time: 2ms

PNP level output（current output 100mA，with overload protection.）

RS485 output，with functions of parameters modification, data logging and inquiry

Display Mode

Industrial-grade self-luminous OLED display screen

Power Input

DC（20～30）V，with over voltage, over current and short circuit protection; Power consumption：

5W（24V@200mA）with built-in EMI wave filter, resistance to pulse group’s Interference: 2500VDC

Warm up time

With built-in 40℃ constant temperature heater, start temperature measurement within 10mins after power on. Assembled whole-process temperature compensation, temperature measurement accuracy is nearly unaffected by ambient temperature.

Aiming Method

Green visible aiming laser or eyepiece, choose 1

Port

Imported sealed plug and 12-core high-temperature shielded cable

Operating Environment

No water cooling：-20℃～+60℃，air purge pressure: 0.1MPa，flow rate: 6L/ min

With water cooling：-20℃～+200℃，water cooling pressure: 0.2MPa，flow rate: 2L/min

Protection Level

IP65